|
GloWarm Heaters - ventfree infrared heaters
GloWarm Infrared heaters are residential gas space heaters that are ventfree,
so no venting is required
GloWarm Plaque
Infrared heaters direct heat from radiant plaques that
"warm like the
sun."
Infrared heaters heat objects in the room before the air,
making them ideal
for un-insulated rooms in your home.
|
|
GloWarm Ventfree Plaque Infrared Heaters
|
|
|
|
|
Model |
Fuel Type |
Description |
BTU Per Hour |
GWRN10 |
Natural
Gas |
Heats up to 300 Sq. Feet
2 Heat Settings
Manually Controlled |
10,000 |
GWRP10
|
Propane |
Heats up to 300 Sq. Feet
2 Heat Settings
Manually Controlled |
10,000 |
GWRN18A
|
Natural
Gas |
Heatsup to 600 Sq. Feet
2 Heat Settings
Manually Controlled |
18,000 |
GWRP16A
|
Propane |
Heats up to 600 Sq. Feet
2 Heat Settings
Manually Controlled |
16,000 |
GWRN18TA
|
Natural
Gas |
Heats up to 600 Sq. Feet Thermostatically
Controlled |
18,000 |
GWRP16TA
|
Propane |
Heats up to 600 Sq. Feet Thermostatically
Controlled |
16,000 |
GWRN30A
|
Natural
Gas |
Heats up to 1,000 Sq. Feet Manually Controlled |
30,000 |
GWRP26A
|
Propane |
Heats up to 1,000 Sq. Feet Manually Controlled |
26,000 |
GWRN30TA
|
Natural
Gas |
Heats up to 1,000 Sq. Feet
Thermostatically
Controlled |
30,000 |
GWRP26TA
|
Propane |
Heats up to 1,000 Sq. Feet
Thermostatically
Controlled |
26,000 |
|
|
|
|
Important Heater Information |
|
|
|
|
- Installation must be done by
qualified
service persons.
- Read Owner's Manual before using.
- Check
local codes and ordinances for permitted uses.
- Not for use in recreational
vehicles.
- All products approved for
manufactured
(mobile) home installation.
- We reserve the right to amend
product
specifications without
notice.
- Use with adequate air (ventilation)
only. Humidifies while
it heats.
- Provides water vapor in the area
heated. Refer to owner's
manual for specifics.
- Heating areas based on rooms with
8'
ceilings.
- Operating heater at elevations
above
4,500 ft. could cause
nuisance outages.
|
- Heaters cannot be converted between
fuel types.
- ANSI Z21 11.2 Standard and National
Fuel Gas Code revised
in 1994 to permit wall mounted installations of ventfree gas heaters
of
10,000 btu or less in bedrooms and 6,000 btu or less in bathrooms.
As
always
check local codes
|
|
|
|
|