|
Glo-Warm Blue Flame Heaters
Glo-Warm
Blue Flame Convection heaters work much like a central heating system.
Glo-warm heaters require no electricity to run making them a great heater for back up heating during power outages.
|
Glo-Warm Vent Free Blue Flame Heaters |
|
|
|
Model |
Fuel Type |
Description |
BTU |
GWN6
|
Natural
Gas |
Heats up to 200 Sq. Feet
2 Heat Settings
Manually Controlled |
6,000
|
GWP6 |
Propane |
Heats up to 200 Sq. Feet
2 Heat Settings
Manually Controlled |
6,000
|
GWN10
|
Natural
Gas |
Heats up to 300 Sq. Feet
2 Heat Settings
Manually Controlled |
10,000
|
GWP10 |
Propane |
Heats up to 300 Sq. Feet
2 Heat Settings
Manually Controlled |
10,000
|
GWN10T
|
Natural
Gas |
Heats up to 300 Sq. Feet Thermostatically Controlled
|
10,000
|
GWP10T
|
Propane |
Heats up to 300 Sq. Feet Thermostatically Controlled
|
10,000
|
GWN20TA |
Natural
Gas |
Heats up to 700 Sq. Feet Thermostatically Controlled
| 20,000 |
GWP20TA
|
Propane |
Heats up to 700 Sq. Feet
Thermostatically Controlled | 20,000 |
GWN30TA
|
Natural
Gas |
Heats up to 1,000 Sq. Feet Thermostatically Controlled
| 30,000 |
GWP30TA
|
Propane |
Heats up to 1,000 Sq. Feet
Thermostatically Controlled
|
30,000 |
Reddy Heater vent free Blue Flame GARAGE heaters |
GN30 Models
|
Natural Gas |
Heats 1,000 Sq. Feet
Multiple Heat Settings |
30,000 |
GP30 Models |
Propane |
Heats 1,000 Sq. Feet
Multiple Heat Settings |
30,000 |
The "Outdoorsman" by Reddy Heater |
RH10PT
|
Propane |
Heats 300 Sq. Feet
Thermostatically Controlled
|
10,000
|
|
|
|
|
Important Heater Information |
|
|
|
|
- Installation must be done by
qualified
service persons.
- Read Owner's Manual before using.
- Check
local codes and ordinances for permitted uses.
- Not for use in recreational
vehicles.
- All products approved for
manufactured
(mobile) home installation.
- We reserve the right to amend
product
specifications without
notice.
- Use with adequate air (ventilation)
only. Humidifies while
it heats.
- Provides water vapor in the area
heated. Refer to owner's
manual for specifics.
- Heating areas based on rooms with
8'
ceilings.
- Operating heater at elevations
above
4,500 ft. could cause
nuisance outages.
|
- Heaters cannot be converted between
fuel types.
- ANSI Z21 11.2 Standard and National
Fuel Gas Code revised
in 1994 to permit wall mounted installations of vent-free gas heaters
of
10,000 btu or less in bedrooms and 6,000 btu or less in bathrooms.
As
always
check local codes
|
|
|
|
|